Work Meister S1 3P Wheel - 19x15.0 / Offset +17 / 172mm / O-Disk
| SKU | WORK-S13P-19150-17-172-O |
|---|---|
| Colour(s) | Silver, Black, Bright Buff Finish, White, Gold, Gloss Bronze, Feinheit Silver, Matte Gunmetal, Matte Black, Gloss Black |
| Manufacturer | Work Wheels |
| Center Cap | Not Included |
| Diameter | 19" |
| Width | 15" |
| Valve Stem | Included |
| Special Order | Yes |
| Standard Wait Time | 8-12 Weeks (May Vary) |
DESCRIPTION
Meister series has been the one of the most recognized Work wheels in our line up. The Meister S1 3P is a true three piece modular construction wheel. Each wheel is constructed with our advanced forming outer and inner rim barrel with bolt on center disk. The advantages of three piece wheels are strength, rebuildable and wider rim width. Very popular with larger sport coupe that require wider rim width.
Variation should also include PCD
Available finishes: Silver, Black, White and Bright Buff Finish
- Included accessories: (1) Valve Stem (V29A V13C2) (1) Spoke decal (1) Lip decal
- Silver assembly bolts are standard. Chrome Gold Black are additional cost
- For lip size of 33mm, the center disk will protrude from rim edge by 12mm
A Disk
A-Disk is our standard disk type. It has moderate amount of brake clearance, fits over most OEM brake callipers. It offer moderate amount of lip. A disk option is available on all Work two and three piece wheels.
O disk
O disk is designed mostly for rear wheel use. Noticed the curvature of the spoke is slightly less than A-Disk and the hub area is slightly thinner. Since spoke curve is less than A-Disk, then the center disk will appear to be flatter and allow more lip to be exposed, but this give the wheels least amount of brake clearance. O disk is available on all Work two and three piece wheels.
L,R,T disk
L, R and T disk are all big brake caliper disks. These are designed for BBK application or OEM vehicle with larger size brake callipers. Noticed the curvature of the spoke is much more than A and O disk thus to create more room for brake caliper, but very little lip shown. Almost all Work two and three piece wheels are available with R disk option.
Variation should also include PCD
Available finishes: Silver, Black, White and Bright Buff Finish
- Included accessories: (1) Valve Stem (V29A V13C2) (1) Spoke decal (1) Lip decal
- Silver assembly bolts are standard. Chrome Gold Black are additional cost
- For lip size of 33mm, the center disk will protrude from rim edge by 12mm
A Disk
A-Disk is our standard disk type. It has moderate amount of brake clearance, fits over most OEM brake callipers. It offer moderate amount of lip. A disk option is available on all Work two and three piece wheels.
O disk
O disk is designed mostly for rear wheel use. Noticed the curvature of the spoke is slightly less than A-Disk and the hub area is slightly thinner. Since spoke curve is less than A-Disk, then the center disk will appear to be flatter and allow more lip to be exposed, but this give the wheels least amount of brake clearance. O disk is available on all Work two and three piece wheels.
L,R,T disk
L, R and T disk are all big brake caliper disks. These are designed for BBK application or OEM vehicle with larger size brake callipers. Noticed the curvature of the spoke is much more than A and O disk thus to create more room for brake caliper, but very little lip shown. Almost all Work two and three piece wheels are available with R disk option.
