FIC 2150cc Nissan 240SX 14mm Setup Injector Set (High-Z)

IS182-2150H
Special order, usually ships in 2-3 weeks. However, if the manufacturer has this item in stock we can normally drop ship it directly to you within 3-5 business days. Contact us and we can get you an accurate ETA before placing an order.
$840.00
$840.00

FIC 2150cc Nissan 240SX 14mm Setup Injector Set (High-Z)

2150cc Nissan 240SX 14mm FIC's Data Matched high performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a Lifetime warranty

Fuel Injector Clinic's high performance fuel injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.

Fuel Injector Clinic's high performance fuel injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please between FIC prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by their lifetime warranty.

This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.

Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please between FIC prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by their lifetime warranty.

This massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU's ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.

CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels

Specification:

  • Cylinder Quantity: 4
  • Engine Aspiration: turbocharged
  • Fuel Pressure: 43.5
  • Impedance: High-Z
  • WHP on E85 at 43psi 90%DC NA: 963.96
  • WHP on E85 at 43psi 90%DC Supercharged: 876.32
  • WHP on E85 at 43psi 90%DC Turbo: 803.30
  • WHP on E85 at 58psi 90%DC NA: 1113.37
  • WHP on E85 at 58psi 90%DC Supercharged: 1012.15
  • WHP on E85 at 58psi 90%DC Turbo: 927.81
  • WHP on Gas at 43psi 90%DC NA: 1253.14
  • WHP on Gas at 43psi 90%DC Supercharged: 1139.22
  • WHP on Gas at 43psi 90%DC Turbo: 1044.29
  • WHP on Gas at 58psi 90%DC NA: 1447.38
  • WHP on Gas at 58psi 90%DC Supercharged: 1315.80
  • WHP on Gas at 58psi 90%DC Turbo: 1206.15

Customer Reviews

Your cart

×